Anthem AVM 20 Amplifier in black or silver

FEATURES

Dolby Digital, DTS, THX Surround EX
THX Ultra certified
FM/AM tuner
Six-channel analog input
Six-channel bass management
Analog-direct mode (all inputs)
Adjustable low-pass/high-pass crossover (from 40Hz to 160Hz in 10Hz increments)
Three-zone operation and record path
192kHz/24-bit DACs
On-screen menu (works with both composite and S-video outputs in both main and zone 2)
Selectable menu-background color
Center-channel equalization
Surround modes (10)
Composite video inputs (7)
Composite video outputs (5)
S-video inputs (7)
S-video outputs (5)
Component video inputs (2) (assignable)
High-definition, broadcast-quality (1080p compliant) component video switching
Headphone jack
IEEE 1394/PHAST Interface
Sleep timer
IR emitters (2)
Trigger outputs (2 - 50mA, 1 - 200mA)
XLR audio inputs (1)
XLR audio outputs (10)
RCA audio inputs (7)
Coaxial digital inputs (7)
TosLink digital inputs (3)
Learning remote

PREAMPLIFIERTION

Input Impedance: 20 k ohms
Output Impedance Main-RCA: 300 ohms
Output Impedance Other-RCA: 51 ohms
Output Impedance XLR: 600 ohms
Rated Input: 2.0 Vrms
Maximum Input 6-Channel S/E: 3.0 Vrms
Maximum Input All Others: 5.3 Vrms
Rated Output (100k ohms load): 2.0 Vrms
Minimum Load: 5k ohms
Maximum Output RCA: 6.3 Vrms
Maximum Output XLR: 12.6 Vrms
Headphone Output: 100 mW into 32 ohms @ 0.2% THD+N
Volume Range Main: -95.5 dB to +31.5 dB (0.5 dB resolution)
Volume Range Zone 2/3 & Headphone: -62.5 dB to +10.0 dB (1.25 dB resolution)
Bass Management High-Pass Slope (Small Speaker Setting): 12 dB/octave (2nd order)
Bass Management Low-Pass Slope (Subwoofer): 24 dB/octave (4th order)
Bass Management Crossover Frequency (Adjustable in 5 Hz Increments): 25-160 Hz
Tone Control Bass Turnover Frequency: 200 Hz
Tone Control Treble Turnover Frequency: 2 kHz
Tone Control Range: +/- 12 dB
Tone Control Filter Response Type: Shelf
Channel Separation (at 1 kHz): 82 dB
Crosstalk Between Inputs (at 1 kHz): 86 dB

MAIN PATH

Frequency Response and Bandwidth 6-Ch S/E and 2-Ch BAL Direct Inputs: 10 Hz to 20 kHz +0, -0.2 dB; 1 Hz to 130 kHz -3 dB
Frequency Response and Bandwidth 2-Ch S/E Direct Inputs: 10 Hz to 20 kHz +0, -0.2 dB; 1 Hz to 120 kHz -3 dB
Frequency Response and Bandwidth Analog-DSP Inputs @ 24/96: 10 Hz to 20 kHz +0, -0.3 dB; 1 Hz to 37 kHz -3 dB
Frequency Response and Bandwidth Digital Inputs @ 24/96: 10 Hz to 20 kHz +0, -0.2 dB; 1 Hz to 39 kHz -3 dB
THD+N (at Rated Input & Output) 6-Ch S/E Direct Input: 0.003% (80 kHz BW)
THD+N (at Rated Input & Output) 2-Ch BAL Direct Input: 0.004% (80 kHz BW)
THD+N (at Rated Input & Output) 2-Ch S/E Direct Inputs: 0.006% (80 kHz BW)
THD+N (at Rated Input & Output) Analog-DSP Inputs @ 24/48: 0.006% (AES17 filter)
THD+N (at Rated Input & Output) Digital Inputs @ 24/48: 0.004% (AES17 filter)
IMD (CCIF) @ 15 kHz & 16 kHz 6-Ch S/E Direct Input: 0.001%
IMD (CCIF) @ 15 kHz & 16 kHz 2-Ch BAL Direct Input: 0.002%
IMD (CCIF) @ 15 kHz & 16 kHz 2-Ch S/E Direct Input: 0.003%
IMD (CCIF) @ 15 kHz & 16 kHz Analog-DSP Inputs @ 24/48: 0.003%
IMD (CCIF) @ 15 kHz & 16 kHz Digital Inputs @ 24/96: 0.001%
S/N Ratio (ref. 2.0 Vrms A-weighted) 6-Ch S/E Direct Input: 107 dB
S/N Ratio (ref. 2.0 Vrms A-weighted) 2-Ch Direct Inputs: 106 dB
S/N Ratio (ref. 2.0 Vrms A-weighted) Analog-DSP Inputs @ 24/48: 100 dB
S/N Ratio (ref. 2.0 Vrms A-weighted) Digital Inputs @ 24/96: 104 dB
XLR Pin Configuration: Pin 1: Ground, Pin 2: Positive, Pin 3: Negative

ZONE 2 and ZONE 3 PATHS

Frequency Response and Bandwidth: 20 Hz to 20 kHz +0, -0.1 dB; 3 Hz to 140 kHz -3 dB
THD+N (at Rated Input & Output): 0.06% (80 kHz BW)
IMD (CCIF at 15 kHz & 16 kHz): 0.06%
S/N Ratio (ref. 2.0 Vrms A-weighted): 97 dB
RECORD PATH Analog to Digital Conversion S/N Ratio (A-weighted): 100 dB

FM TUNERTION

AM TUNERTION

VIDEOTION

Bandwidth Composite & S-Video: 6 MHz -0.02 dB; 70 MHz -3 dB
Bandwidth Component: Green: 110 MHz -3 dB
Bandwidth Component: Red: 90 MHz -3 dB
Bandwidth Component: Blue: 80 MHz -3 dB
All video inputs and outputs are 75 ohms, 1.5 Vp-p. Component inputs and outputs work with any Standard requiring ultra-wide bandwidth (1080 p compatible), including Component-RGB, HDTV, line doublers, quadruplers, and scalers.

DIGITAL AUDIO

All digital audio inputs and outputs are to S/PDIF electrical (75 ohm, 0.5 Vp-p), S/PDIF optical (Toslink), or AES / EBU (110 ohms, 5 Vp-p) standards as appropriate.
Processor: Motorola DSP 56367 150 MHz
Audio Converters Analog to Digital: AKM AK5383 up to 24-bit/96 kHz
Audio Converters Digital to Analog: AKM AK4382 up to 24-bit/192 kHz

CONTROL

Infra Red Carrier Frequency: 38 kHz
Infra Red Max. 12V Supply Current: 150 mA
Infra Red Max. Emitter Current: 100 mA per output
RS-232 Connection: DB-9F (straight-wired)
RS-232 Pin Configuration (AVM20 Side): Pin 2: Tx, Pin 3: Rx, Pin 5: Ground
RS-232 Port Configuration: Baud rate (1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200), 8 data bits, 1 stop bit, no parity bits, flow control (RTS, CTS, NONE)
Trigger Outputs Polarity: tip positive; sleeve negative
Trigger Outputs Max. Current @ 12 VDC: 50 mA (Triggers 1,2), 200 mA (Trigger 3)
Trigger Outputs Sequential Delay: 250 ms

MISCELLANEOUS

DIMENSIONS

Width: 17-1/4 inches (43.8 cm)
Height: 5-7/8 inches (14.9 cm) including feet; Rack-mounting: 3 rack units, without feet
Depth: 14-1/4 inches (36.2 cm)
Weight: 27 lb (12.2 kg)

We sell brand new, factory sealed Anthem AVM 20 amplifiers with full FACTORY WARRANTY.

We also occasionally have PRE-OWNED specials.